Molecular mechanics simulation on the nanoindentation on POSS nanocompositeFANLIN ZENG; YI SUN; YU ZHOU et al.Proceedings of SPIE, the International Society for Optical Engineering. 2008, Vol 6423, pp 642322.1-642322.6, issn 0277-786X, isbn 978-0-8194-6536-8 0-8194-6536-4, 3Conference Paper

Photoplastic effect in non-crystalline materials : a nanoindentation studyTRUNOV, M. L.Journal of physics. D, Applied physics (Print). 2008, Vol 41, Num 7, issn 0022-3727, 074011.1-074011.9Conference Paper

Quantitative prediction of phase transformations in silicon during nanoindentationLIANGCHI ZHANG; BASAK, Animesh.Philosophical magazine letters. 2013, Vol 93, Num 7-9, pp 448-456, issn 0950-0839, 9 p.Article

Nanoindentation: Measuring methods and applicationsLUCCA, D. A; HERRMANN, K; KLOPFSTEIN, M. J et al.CIRP annals. 2010, Vol 59, Num 2, pp 803-819, issn 0007-8506, 17 p.Conference Paper

Reversible plasticity under nanoindentation of atomically flat and stepped surfaces of fcc metalsZIEGENHAIN, Gerolf; URBASSEK, Herbert M.Philosophical magazine letters. 2009, Vol 89, Num 11, pp 717-723, issn 0950-0839, 7 p.Article

Modeling of recrystallization in cold rolled copper using inverse cellular automata and genetic algorithmsGHOSH, Sudipto; GABANE, Prashant; BOSE, Anindya et al.Computational materials science. 2009, Vol 45, Num 1, pp 96-103, issn 0927-0256, 8 p.Conference Paper

Bilinear behavior in nano and microindentation tests of fcc polycrystalline materialsELMUSTAFA, A. A; ANANDA, A. A; ELMAHBOUB, W. M et al.Journal of engineering materials and technology. 2004, Vol 126, Num 4, pp 353-359, issn 0094-4289, 7 p.Article

Correlation between yield stress and hardness of nickel-silicon-boron-based alloys by nanoindentationSERBAN, Viorel-Aurel; CODREAN, Cosmin; VODA, Mircea et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 605, pp 294-300, issn 0921-5093, 7 p.Article

Effect of dislocation density on improved radiation hardening resistance of nano-structured tungsten-rheniumARMSTRONG, David E. J; BRITTON, T. B.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 611, pp 388-393, issn 0921-5093, 6 p.Article

Enhancing toughness of CrN coatings by Ni addition for safety-critical applicationsPUI CHING WO; MUNROE, Paul R; JIANG, Zhong-Tao et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 596, pp 264-274, issn 0921-5093, 11 p.Article

Influence of electro-co-deposition parameters on nano-TiO₂ inclusion into nickel matrix and properties characterization of nanocomposite coatings obtainedBENEA, Lidia; DANAILA, Eliza; CELIS, Jean-Pierre et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 610, pp 106-115, issn 0921-5093, 10 p.Article

Mathematical description of indentation creep and its application for the determination of strain rate sensitivityCHINH, Nguyen Q; SZOMMER, Péter.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 611, pp 333-336, issn 0921-5093, 4 p.Article

Study of the Structural and Mechanical Properties of Nanocrystalline TiAISiN Gradient CoatingsCHOLAKOVA, T; CHITANOV, V; POLYCHRONIADIS, E et al.Journal of nano research (Print). 2014, Vol 27, pp 15-24, issn 1662-5250, 10 p.Article

Synthesis, characterization, and nanoindentation response of single crystal Fe-Cr-Ni alloys with FCC and BCC structuresXIA, Y. Z; BEI, H; GAO, Y. F et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 611, pp 177-187, issn 0921-5093, 11 p.Article

Anomalous softening behavior in Ti/Ni multilayers with ultra-high hardnessSHI, J; CAO, Z. H; WEI, M. Z et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 618, pp 385-388, issn 0921-5093, 4 p.Article

Depth dependent strain rate sensitivity and inverse indentation size effect of hardness in body-centered cubic nanocrystalline metalsZHAO, J; WANG, F; HUANG, P et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 615, pp 87-91, issn 0921-5093, 5 p.Article

Microstructure control and mechanical properties of Ti44Al6Nb1.0Cr2.0V alloy by cold crucible directional solidificationSHULIN DONG; RUIRUN CHEN; JINGJIE GUO et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 614, pp 67-74, issn 0921-5093, 8 p.Article

Effect of layer thickness on the high temperature mechanical properties of Al/SiC nanolaminatesLOTFIAN, S; MAYER, C; CHAWLA, N et al.Thin solid films. 2014, Vol 571, pp 260-267, issn 0040-6090, 8 p., 2Conference Paper

Fluorescence imaging of nanobiomaterials: Thioflavin T in electrospun poly(vinyl alcohol) fibresYOUMIN LEE; YU LIM KIM; MYUNG HWA KIM et al.International journal of nanotechnology. 2014, Vol 11, Num 5-8, pp 502-508, issn 1475-7435, 7 p.Conference Paper

Application of nanoindentation technique for investigation of elasto-plastic properties of the selected thin film materialsWYMYSLOWSKI, Artur; DOWHAN, Lukasz.Microelectronics and reliability. 2013, Vol 53, Num 3, pp 443-451, issn 0026-2714, 9 p.Article

Chemical and mechanical properties of silica hybrid films from NaOH catalyzed sols for micromachining with diamond cutting toolsPRENZEL, T; MEHNER, A; ZOCH, H.-W et al.Thin solid films. 2013, Vol 531, pp 208-216, issn 0040-6090, 9 p.Article

Effects of cold-rolling deformation on texture evolution and mechanical properties of Ti―29Nb―9Ta―10Zr alloyCOJOCARU, V. D; RADUCANU, D; GLORIANT, T et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2013, Vol 586, pp 1-10, issn 0921-5093, 10 p.Article

Fast deposition of diamond-like carbon films by radio frequency hollow cathode methodXIAOLU PANG; HAILI PENG; HUISHENG YANG et al.Thin solid films. 2013, Vol 534, pp 226-230, issn 0040-6090, 5 p.Article

Investigating the mechanical properties, creep and crack pattern of Cu₆Sn₅ and (Cu,Ni)₆Sn₅ on diverse crystal planesMU, D; HUANG, H; MCDONALD, S. D et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2013, Vol 566, pp 126-133, issn 0921-5093, 8 p.Article

Mechanical Characterization of Lead-Free Sn-Ag-Cu Solder Joints by High-Temperature NanoindentationLOTFIAN, S; MOLINA-ALDAREGUIA, J. M; YAZZIE, K. E et al.Journal of electronic materials. 2013, Vol 42, Num 6, pp 1085-1091, issn 0361-5235, 7 p.Article